batte melt pump
Batte > News >

hydraulic screen changer plastic recycle

Adding a hydraulic screen changer to a plastic recycling line is an important part of the process. Hydraulic screen changer is a kind of equipment for melt filtration, which is widely used in the processing field of plastics, rubber, chemical fiber and other polymer materials. In the production process, some unqualified products will be produced, which need to be recycled and reused. And plastic recycling is to separate, clean, crush, melt and a series of other processing of unqualified products

Screen changer for plastic recycling extrusion

In the production of plastic extrusion, there may be various impurities and foreign objects in the raw materials, as well as fine crystal particles with incomplete plasticization. Especially in the recycling process of recycled plastics, there are various impurities such as paper scraps, aluminum foil, sand, iron scraps, copper wire, wood scraps, and ineffective defoamers. If no screen changer is installed for impurity filtration, the presence of these impurities will cause a decrease in product

What is the role of a new continuous screen changer in the production line of foam sheets

The excellent sealing performance of the new continuous hydraulic extrusion screen changer prevents the corrosion of the machine by flame retardants. The addition of flame retardants requires special measures to protect the steel used from corrosion. In order to minimize the corrosiveness of flame retardants, the melt temperature must be maintained within a narrow range (approximately 220 ℃ for higher temperatures). The corrosiveness of flame retardants increases sharply with each increase in me

The Solution of Screen Changer in Plastic Recycling

In the production process of plastic extrusion, there may be various impurities and fine crystal particles with incomplete plasticization in the raw materials. Even for brand new materials, there may be impurities present during transportation and production. If not filtered, it can lead to a decrease in product quality, an increase in defective products, and even damage the extrusion equipment, leading to production interruption. plastic extrusion continuous screen changer As an essential equip

Dual station design, fast and automatic screen change without stopping!

In the production process of plastic extrusion granulation, due to the use of a single station structure design in the existing water cooled strip pelletizer, it is easy to break the strip during the production process, especially during the process of changing the mesh with the granulation screen changer . In severe cases, it may even require a shutdown to change the mesh, which seriously affects the working efficiency of the extruder, as well as the stability and continuity of product performa


Chat live
Fax:+86 371-67993277
Tel: +86 371-67991755
Sales direct: +86 15838331071
E-mail:sales@battemachinery.com
http://www.screen-changer.org
24h services
batte melt pump

More about screen changer products:

Backflush extrusion screen chan

hydraulic double plate continuo

hydraulic continuous double pla

Double plate screen changer

batte extrusion melt filter


©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould