batte melt pump

PS Twin Screw Extruder Screen Changer – Continuous Hydraulic Melt Filtration for Polystyrene Compounding & Recycling

Polystyrene (PS) twin-screw compounding and recycling have strict requirements for melt stability, low carbonization and consistent filtration quality. A reliable PS twin screw extruder screen changer acts as the core melt filtration unit installed between the twin screw barrel and die head or melt pump, removing gels, black specks, unmelted particles, metal debris and recycled contaminants from molten PS while maintaining steady back pressure for consistent extrusion output.

Most PS formulations — flame-retardant PS, mineral-filled PS masterbatch, recycled PS re-pelletizing and XPS foam raw material — are sensitive to temperature fluctuation and melt leakage. Ordinary slide-plate screen changers often cause obvious pressure spikes, PS degradation and frequent shutdowns during screen replacement. Our hydraulic continuous twin-column screen changer is specially optimized for PS twin screw extrusion, solving the pain points of PS melt carbonization, seal leakage and unstable melt flow.

twin screw compounding screen changer

Core Advantages of Our Screen Changer for PS Twin Screw Extrusion

Non-stop screen change, minimum pressure fluctuation

Dual-station piston design. While one filter cavity is online for filtration, the second cavity can be pulled out for screen pack replacement. PS melt flow keeps continuous without stopping the twin screw extruder, avoiding production loss and PS material degradation caused by repeated heating and cooling.

Anti-carbonization sealing system for PS melt

High-temperature, anti-coking alloy seals resist PS carbon buildup. Precision heat-treated flow channel reduces dead zones where molten PS stays and burns, critical for transparent PS sheets and light-color PS masterbatch production. Max working temperature up to 300°C, working pressure 25–30 MPa, fully matching PS processing parameters.

Custom filtration accuracy for different PS grades

Support multi-layer screen packs from 40 mesh to 300 mesh. Fine filtration for clear PS sheet and optical-grade PS; coarse filtration for dirty post-consumer PS recycling lines. Effectively protect downstream melt pump and extrusion die from scratch and blockage by hard impurities.

Perfect match with co-rotating twin screw extruder

Modular flange connection fits all common twin screw models. Compact structure, short melt runner, low pressure drop. PLC pressure monitoring and alarm optional: system alerts operators when screen clogging reaches the preset pressure threshold, easy integration into your existing PS compounding line.

Wide PS application coverage

Polystyrene compounding, PS filled masterbatch, flame retardant PS, recycled PS pelletizing, XPS foam board, PS sheet and film extrusion. It also works compatibly with ABS, PP, PE, PET and other thermoplastics if you run multi-material production on the same twin screw line.

PS twin screw extruder screen changer

Technical Specs Overview

Type: Hydraulic continuous twin-column / double piston screen changer

Application: Co-rotating twin screw extruder, PS compounding & recycling

Max operating pressure: 30 MPa

Max melt temperature: 300°C

Filter size: Customized from 80 mm to 650 mm

Certificate: CE, ISO9001

Control: Manual hydraulic / automatic PLC pressure control

How to Select the Right Screen Changer for Your PS Twin Screw Line

Confirm your twin screw extruder output and PS melt viscosity; higher recycled PS contamination requires larger filtration area.

Prioritize continuous hydraulic type if you run 24-hour PS compounding; manual slide plate is only for low-output batch production.

For transparent or light-color PS products, choose polished flow channel and anti-coking sealing to reduce black spots.

Match the flange size with your extruder outlet and melt pump inlet for direct retrofit.

non-stop screen changer for plastic extrusion

For PS twin screw extrusion manufacturers chasing stable quality, less scrap and higher uptime, a purpose-built PS twin screw extruder screen changer is not an optional accessory but essential equipment. It cuts defective rates from black specks and gels, protects expensive downstream tooling, and brings stable long-run production for PS masterbatch, foam, sheet and recycling projects.

Contact us to get a matched screen changer solution based on your twin screw model, PS formulation and hourly output.

Email: sale@meltpump.com

WhatsApp: +86 158 3833 1071



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould